 |
Flanges
We manufacture and export a wide assortment of flanges that are available in all sizes, pressure ratings and in all the common configurations. Our range comprises of weld neck flanges, slip on flanges, blind flanges, lap joint flanges, threaded flanges, din flanges, socket weld flanges and more. Fabricated using best grade raw material, these are known for their dimensional accuracy, high strength and durability. Further, our range comply with various national and international standards.
|
|
|
|
|
|
Weld Neck FlangesThis flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications. The various types of weld neck flanges are: - Weld Neck Flat Face Flanges
- Raised Face Weld Neck Flanges
| ANSI B 16.5 Class 150 | ANSI B 16.5 Class 300 | ANSI B 16.5 Class 600 | | ANSI B 16.5 Class 900 | ANSI B 16.5 Class 1500 | ANSI B 16.5 Class 2500 | | |
|
|
|
|
|
|
|
|
|
| |
Slip on FlangesThis flange is slipped over the pipe and then fillet welded. Slip on flat face flanges are easy to use in fabricated applications. | ANSI B 16.5 Class 150 | ANSI B 16.5 Class 300 | ANSI B 16.5 Class 600 | | ANSI B 16.5 Class 900 | ANSI B 16.5 Class 1500 | | | |
|
|
|
|
|
|
|
|
|
Blind FlangesThis flat face blind flanges are used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange. | ANSI B 16.5 Class 150 | ANSI B 16.5 Class 300 | ANSI B 16.5 Class 600 | | ANSI B 16.5 Class 900 | ANSI B 16.5 Class 1500 | ANSI B 16.5 Class 2500 | | |
|
|
|
|
|
|
|
|
|
| |
Lap Joint FlangesThese flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. This means the stub end or taft always makes the face. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these flanges can be supplied without a hub and/or in treated, coated carbon steel. | ANSI B 16.5 Class 150 lb | ANSI B 16.5 Class 300 lb | ANSI B 16.5 Class 400 lb | | ANSI B 16.5 Class 600 lb | ANSI B 16.5 Class 900 lb | ANSI B 16.5 Class 1500 lb | | |
|
|
|
|
|
|
|
|
| |
DIN FlangesWe offer high quality flanges that conform to the standard specifications of DIN - Deutsches Institut für Normung (German Institute for Standardization). These flanges can be availed in different material specifications including carbon steel, stainless steel and alloy steel. Available at the most reasonable prices, our DIN flanges can work efficiently under high temperature and pressure. | DIN 2502 | DIN 2503 | DIN 2527 | | DIN 2565 / 2566 | DIN 2573 / 2576 | DIN 2627 / 2628 | | DIN 2629 / 2630 | DIN 2631 | DIN 2632 | | DIN 2633 | DIN 2634 | DIN 2635 / 2636 | | DIN 2637 / 2638 | DIN 2641 | DIN 2642 | | DIN 2655 / 2656 | DIN 86029 / 86030 | | | |
|
|
|
|
|
|
|
|
|
Socket Weld FlangesThis flange is counter bored to accept the pipe before being fillet welded. The bore of the pipe and flange are both the same therefore giving good flow characteristics. | ANSI B 16.5 Class 150 | ANSI B 16.5 Class 300 | ANSI B 16.5 Class 600 | | ANSI B 16.5 Class 1500 | | | | |
|
|
|
|
|
|
|
|
|
| |
Plate FlangesPlate flanges are special types of flanges that have raised face and back ups. Made from quality mill plates, these flanges have high weldability & hardenability. Our range of plate flanges can be availed in different dimensional specifications depending upon the requirements and their applications. | |
|
|
|
|
|
Products
Products View all our products / services as a slide show. |
|
